Cookie Img
Send inquiry
Home » Products » Ultrasonic Flow Meter » Portable UFM for Dirty & Aerated Liquids

Portable UFM for Dirty & Aerated Liquids

Portable UFM for Dirty & Aerated Liquids
Portable UFM for Dirty & Aerated Liquids
Send Inquiry
Product Code : PDFM 5.1
Product Description

Ultrasonic Portable Flow Meter for Dirty & Aerated Liquids

Features :

  • Troubleshoot Flow from Outside a Pipe
  • Simple-key Calibration 5
  • 300,000 point Data Logger
  • 4-20mA Output
  • 10-Digit Totalizer
  • AC/DC Operation
  • Built-in Rechargeable Battery

Use a Greyline PDFM 5.1 Portable Doppler Flow Meter to monitor and balance flow, or to troubleshoot flow problems in pipes. It is ideal to full evaluate performance of in-line flow meters and can be installed, calibrated and started-up in minutes. The flow rate of any fluid can be measured as long as it contains air bubbles or solids. It is ideal for wastewater, slurries, sludge, and most chemicals, acids, caustics, and lubrication fluids.

Recommended for:

  • Sewage
  • Treated Wastewater
  • Aerated Water
  • Sludge And Slurries
  • Chemicals and Solvents
  • Viscous Liquids
  • Abrasives
  • Food Products
  • Pulp Stock
  • Acids and Caustics

Technical Specifications

Flow Rate Range

± 0.1 to 40ft/sec ( ± 0.03 to 12.2 m/sec)

Pipe Size

Ultrasonic Sensor mounts on any pipe from ½" to 180" ID (12.5 mm to 4.5 m)

Display

White, backlit matrix - displays flow rate, totalizer, operating mode and calibration menu

Power Input

Built-in battery NiMH for up to 18 hours continuous operation

External charger with 100-240VAC 50/60Hz input

Outputs

4-20mA (500 ohm) when AC powered

USB for Data Log transfer by direct PC connection

Data Logger

Programmable 300,000 data point capacity, time and date stamped or formatted flow reports including total, average, minimum, maximum and times of occurrence

PC Software

Greyline Logger’ for Windows Vista or higher. Retrieves, displays and saves data log files

Electronics Operating Temperature

-10° to 140°F (-23° to 60°C)

Accuracy

±2% of reading or 0.1 ft/sec (0.03 m/sec). Requires solids or bubbles minimum size of 100 microns, minimum concentration 75 ppm. Repeatability: ±0.1%, Linearity ±0.5%



iADEPT MARKETING
X


Quick Inquiry Form

IADEPT MARKETING All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.